Why Should You Not Have a Flickering Light in Your Space?

Are the lights in your home flickering? If so, this could be a simple problem that can be fixed in a few minutes, or it could be a faulty electrical system. So, it is very crucial to identify the problem and make sure there are no deeper electrical problems that could cause electric shock or fire.

Here are five important reasons why light flickers and why it needs to be fixed with the help of a professional electrician in Brunswick and other places.

Light Structure is Loose

When was the last time you checked a flickering bulb to make sure it was properly tightened? If a bulb is loose, even if there is enough connection to light it, the unbalanced power can cause flickering.

For many people, a loose bulb is the best-case scenario. Turn off the light, let it cool down and tighten the bulb. If the light still flickers after tightening it completely, the cause may be one of the following.

Overloading of the circuit due to high current

You may be using an overloaded circuit. Electrical appliances, such as refrigerators and washing machines, require a lot of energy. When such appliances are switched on for the first time, the lights often dim or flicker.

However, if the flickering is only for a short time, there is usually nothing to worry about.

According to a proficient electrician in Northcote and other locations, you should be concerned if:

  • The tremor lasts longer than one second.
  • Flickering occurs continuously.

Installing a new electrical circuit or upgrading the existing circuit is the only way to solve circuit overload problems.

Loosening Wiring

If the lights flicker every few weeks and the problem gets progressively worse, the problem may be loose wiring. This can be caused by wear and tear, obsolescence or even improper installation.

Loose wiring can cause serious problems, including:

  • Arches
  • Overheating.

Both springing and overheating can cause fire and power failure. If the frequency of flickering increases, you should immediately contact an electrician and have the wiring in the house fully checked near Northcote.

High neighbourhood usage

According to an experienced electrician near Brunswick and other regions, utilities can use a lot of power at different times of the day. If you or anyone connected to the transformer is using a lot of power, this can cause problems with the utility service lines and transformer.

Unfortunately, this is not a problem you can solve on your own.

Different types of bulbs

Some bulbs, especially fluorescent bulbs, have a warm-up cycle and are more prone to flicker than LED lights. If the warm-up cycle changes, the lights may flicker:

  • Age of the bulb
  • Temperature.

Dimmer Switches

Another cause of flickering is the use of LED bulbs with dimmer switches. Although dimmer switches can handle large electrical loads, LED lights are designed for low voltage and may not be compatible with the switches in your home.

It is important to buy bulbs that are compatible with the installed switch.

Of course, these are just a few of the many reasons why you may be experiencing flickering lighting. An electrician can identify the problem and repair it before it becomes a serious safety risk to your home!

If your lights are flickering and the problem cannot be solved, leave it to professionals like Aussie Electrical and Solar. Call us at 1300 783 365; email us at info@aeands.com.au or fill out the form to request a quote.